Shielding Design & Test | Corrosion Effects | Cables & Connectors | Workshop Presentations

Click to view and download the Spira Catalog and product datasheets in PDF** format:

Click below to view other references as desired. All are PDF** format except Presentations.


General Shielding Design & Test
Transfer Impedance and Transfer Admittance Measurements on Gasketed Panel Assemblies, and Honeycomb Air Vent Assemblies
by P. J. Madle, IEEE/EMC 1976 Symposium
Applied EMC Control in a High Dynamic Range Environment
by L.A. Messer, IEEE/EMC 1976 Symposium
EMI/RFI Gasketing for Tactical Shielded Door Seam Applications
by B. Cain, US Army Construction Engineering Research Laboratory
Testing Shielding Quality of EMI Gaskets (Guest Editorials)
by George Kunkel, J. Butler, L.A Messer, EMC Technology, January-June 1989
Mechanical Force Considerations in the Use of EMI-Environmental Gaskets
by George Kunkel. IEEE/EMC 1980 Symposium
RF Performance Standard Means
Hewlett Packard Journal (excerpt), June 1984
Internal Modular Signal Generator Mechanical Design
Hewlett Packard Journal (excerpt),December 1985
Selection and Use of Shielded Aluminum Honeycomb Air-Vent Filters
by George Kunkel
VME Design Guide (for Flexi-Shield Gaskets)
by George Kunkel, Spira Mfg. Corporation
EMI Gaskets & Shielding Products Catalog & Design Guide
by Spira Manufacturing Corporation
Electromagnetic Leakage Through Seams and Gasketed Joints - A Demonstration
by George Kunkel. IEEE/EMC 1996 Symposium
Testing the Shielding Quality of EMI Gaskets and Gasketed Joints - A Demonstration
by George Kunkel. IEEE/EMC 1994 Symposium
Lightning Induced Electromagnetic Fields into Aerospace Vehicles
by George Kunkel. Evaluation Engineering, August 1990
Corrosion Effects on Shielding
Corrosion and the EMI/RFI Knitted Wire Mesh Gasket
by G. Roessler, Frequency Technology, 1969
EMI Shielding of Conductive Gaskets in Corrosive Environments
by H.W. Denny and K.R. Shouse, IEEE/EMC 1990 Symposium
Effects of Corrosion on the Electrical Properties of Conducted Finishes for EMI Shielding
by B. Archambeault & R. Thibeau, IEEE/EMC 1989 Symposium
Corrosion Effects on EMI Gasketed Joints
by George Kunkel, IEEE/EMC 1980 Symposium
Corrosion Effects on Field Penetration through Apertures
by George Kunkel, IEEE/EMC 1978 Symposium
Corrosion Control in EMI Design
by E. Groshart, IEEE/EMC 1977 Symposium
Corrosion of MGCS Frame at EMI Gasket Interfaces
by E. B. Lachmar, Rockwell International
Preliminary Corrosion Study of EMI Gaskets for Avionic Systems
by WW Lin, JJ Reilly, HJ Lee, & RJ Brown, Naval Air Development Center, 1987
CORROSION, Special Report
by Reinhold Publishing Corporation, M/DE Magazine, January 1963
Shielded Cables & Connectors
A Simplified Relationship Between Surface Transfer Impedance and Mode Stirred Chamber Shielding Effectiveness of Cables and Connectors
by Lothar O. Hoeft, EMC 2002 Symposium
Comparison of the Electromagnetic Shielding Provided by Circular and Rectangular Connectors and their Accessories
by Lothar O. Hoeft, IICIT 1993
Measured Electromagnetic Shielding Performance of Commonly Used Cables and Connectors
by Lothar O. Hoeft, IEEE 1988
Experimental and Theoretical Analysis of the Magnetic Field Attenuation of Enclosures
by Lothar O. Hoeft, IEEE 1988
Workshop Presentations

The following presentations were given on August 9, 2004 at the IEEE/EMC Symposium in Santa Clara, CA. Technical References from the workshop are also included below.

Please join our mailing list to receive a free CD from the IEEE/EMC 2004 Workshop which contains all of the workshop presentations and references.

Click the links below to view the presentations in a PowerPoint* slide show or click the link for handouts in pdf** format. Note: In PowerPoint, click to advance pages or use the page up and page down keys.

Penetration of an EMI Field Into and Through a Shielding Barrier (Download and unzip to view)
by George Kunkel, Demonstration from IEEE/EMC 1999 Symposium and Multimedia Presentation
Overview of Transfer Functions, Antenna Theory, Shielding Effectiveness* handouts**

by George Kunkel, Spira Manufacturing Corporation

 
Coupling Between Wire Lines and Application to Transfer Impedance Analysis handouts
by Richard Mohr, EMC Consultant
Transfer Impedance as a Measure of the Shielding Quality of Seams and EMI Gasketed Joints handouts
by Dr. Brett Robinson, Robinson Enterprises  
Transfer Impedance as a Measure of the Shielding Quality of Shielded Cables and Connectors handouts
by Lothar (Bud) Hoeft, Consultant, Electromagnetic Effects  
Transfer Function Analysis of EM Shielded Enclosures handouts
by W. Michael King, Systems Design Advisor
 

*Presentations require Microsoft PowerPoint. If you do not have PowerPoint, Click here to install Free Viewer.
** Requires Free Adobe Acrobat Reader. Click below for latest version.


Veteran Owned Small Business.
All products manufactured in the United States of America.

Click to view Spira's Compliance Information.

Click to view Spira's Terms and Conditions.

americanflag